Guides › Bidet installation cost
Bidet installation cost: what you'll pay, DIY or with a plumber
Installing a bidet attachment yourself usually costs nothing beyond the attachment, plus maybe $10–$25 for a part your toilet needs. Paying a plumber to fit one runs about $100–$300 all in, according to Fixr's cost guide. The big numbers you see in cost guides ($500–$1,500, average about $1,000 in Fixr's data) are for bidet seats that need an outlet, standalone bidets and bidet toilets, which need new plumbing or electrical work.
Below: the cost by type, a line-by-line DIY budget, the hidden costs that turn a free install into a $200 one, and when a plumber is worth it.
Bidet installation cost by type
| Type | The bidet | Installed by a pro | Can you DIY it? |
|---|---|---|---|
| Under-seat attachment / spray attachment | $40–$60 (Fixr); $20–$100 DIY total (HomeGuide) | $100–$300 | Yes, in about 30 minutes |
| Handheld sprayer | About $20–$50 | Similar to an attachment | Yes, about 15 minutes |
| Electric bidet seat | $100–$1,000 | $470–$1,700 | Usually, if there's an outlet within reach |
| Standalone bidet (separate fixture) | $200–$600 | $500–$1,500 (Fixr); $700–$2,600 (HomeGuide) | No: new water and drain lines |
| Bidet toilet (built in) | $1,000–$1,200 | $1,200–$2,000 | Rarely: it's a toilet swap plus power |
Ranges are national US figures from Fixr and HomeGuide, checked November 2026. HomeAdvisor gives a typical range of $400–$1,500 and an average near $640 across all types. Your area's labor rates move these a lot.
DIY attachment: the real budget, line by line
An under-seat attachment uses your seat bolts and the toilet's existing cold supply line, so most of the time you buy nothing else. Here's everything you might need, and how likely you are to need it:
| Item | Typical cost | Do you need it? |
|---|---|---|
| The attachment (with hose and T-adapter) | $40–$100 | Yes |
| Adjustable wrench | $0 if you own one, about $10–$15 new | Often; many joints are hand-tight |
| Towel and a bowl or small bucket | $0 | Yes, for the water left in the line |
| Thread seal tape (PTFE) | About $2–$5 | Sometimes; only on threads without a rubber washer |
| New braided supply line | About $8–$15 | If yours is old, kinked or too short to reach the T |
| Thread adapter (e.g. 7/8" to 3/8") | About $5–$15 | If your threads don't match the T |
| New seat bolts or washers | About $5–$10 | If yours are rusted or the attachment needs longer ones |
Part prices are a rough guide to what these standard parts cost at US hardware stores, not quotes; check your local store. Realistic DIY total: the attachment alone, or the attachment plus $10–$25 if your toilet needs a part.
The job itself is: water off, seat off, attachment on, seat back, T-adapter on, hose on, water on, leak test. Our step-by-step install guide walks through all eight steps and the paper-towel leak test.
Hidden costs: what turns a free install into a paid one
Almost every expensive attachment install comes from one of these. Check them before you buy, and you'll know in five minutes whether you need a part or a plumber.
- The shut-off valve won't turn, or won't close fully. Old multi-turn valves seize. Forcing one can crack it. A plumber replacing it is often a one-trip job; budget for a service call. If it drips when you close it, stop and call one.
- The supply line is a rigid pipe. Older toilets sometimes have a solid chrome tube instead of a flexible hose. You'll need to swap it for a braided line (about $8–$15), which is DIY for some and a plumber job for others.
- The threads don't match. The standard toilet thread is 7/8", but some fill valves and imported toilets differ. An adapter fixes it. Our guide to a T-valve that doesn't fit lists the part for each problem.
- No room under the tank. If the shut-off is right under the fill valve, the T may not fit between them. A longer supply line, or a T that goes at the wall valve instead, is the usual fix.
- The toilet itself won't take an attachment. Some one-piece, skirted and wall-hung toilets need a different bidet. Check first with do bidet attachments fit all toilets.
- A leak you didn't catch. A slow drip at a joint can damage a floor over weeks. That's the expensive one, and it's why the leak test matters more than any part.
What a plumber charges, and why
Fixr puts plumbers at $45–$200 an hour and typical bidet installation labor (two to three hours, for the bigger jobs) at $250–$600. HomeAdvisor's average labor figure is about $220. For a plain attachment, the time on site is short, but many plumbers charge a minimum or a trip fee, so expect to pay for an hour or a flat call-out even if the job takes 30 minutes.
What raises the bill:
- Replacing a seized shut-off valve or an old rigid supply line.
- Running a hot-water line from the sink to the toilet for a warm-water attachment or seat.
- A new outlet for an electric seat (below).
- Standalone bidets: new water supply and a drain, often opening a wall or floor.
- Old plumbing that needs updating once it's opened. Fixr notes this raises costs without a set figure.
- Where you live: city labor rates can be double rural ones.
The electrical outlet (electric seats only)
A non-electric attachment needs no power. An electric bidet seat needs a grounded outlet within reach of its cord, and in a bathroom that outlet should be GFCI-protected. Fixr puts adding an outlet at $120–$200. Running an extension cord across a bathroom floor instead is a bad idea; the seat's manual will say so.
If there's no outlet near the toilet, that's the moment to compare: a $40–$100 attachment with no install cost, or a seat plus an electrician. Our attachment vs seat comparison puts them side by side, and the non-electric attachment guide covers what you give up without power.
Warm water: what it adds
Some attachments take a second hose from the hot line under your bathroom sink. If the sink is right next to the toilet, that's DIY: a second T-adapter on the hot shut-off and a longer hose, usually in the box. If it isn't, it's a plumber running a line, which costs real money for a feature many people stop noticing after a week. More on the options in bidet attachment warm water.
DIY or plumber: how to decide
| Situation | Do it yourself | Call a plumber |
|---|---|---|
| Standard two-piece toilet, flexible supply line, valve turns easily | ✓ | |
| Valve is stiff but turns and closes fully | ✓ (gently) | |
| Valve won't turn, drips when turned, or is corroded | ✓ | |
| Rigid chrome supply pipe | ✓ if you're handy | ✓ if you're not |
| Threads don't match | ✓ with an adapter | |
| Need a hot line run to the toilet | ✓ | |
| Electric seat, no outlet | ✓ (electrician) | |
| Standalone bidet or bidet toilet | ✓ | |
| Renting and the lease says no plumbing changes | Ask your landlord first | |
Renting? An attachment is usually the easiest yes for a landlord because it reuses the seat bolts and comes off in ten minutes. Our apartment guide has a message you can send.
How to keep the cost down
- Check the three things before you buy: the valve turns, the supply line is flexible, there's room between the tank and the valve. That's five minutes and it tells you if there's a hidden cost.
- Buy the part when you buy the bidet. If your supply line is old, a new braided one is cheap now and a second trip later.
- Pick a non-electric attachment if you don't have an outlet. No electrician, no running cost.
- Bundle plumber jobs. If you're paying a call-out anyway, have them fix the dripping tap too.
- Don't pay for "installation" on a basic attachment unless one of the hidden problems above applies.
Getting a fair plumber quote
If you do call someone, tell them exactly what you have so the quote is real:
- The bidet type and model (send the product link).
- A photo of the space behind the toilet: the valve, the supply line, the tank bottom.
- Whether the valve turns.
- For warm water: a photo showing how far the sink is.
- For an electric seat: whether there's an outlet, and how far.
Ask whether the price is flat or hourly, whether there's a minimum, and whether replacing the valve or supply line is included if needed. Two or three quotes for the same photos tell you the going rate.
What it costs after it's in
A non-electric attachment has no running cost besides a little water. Over the years, the likely spends are a new hose or T-adapter if one wears out, and maybe a nozzle tip. Electric seats add power use and more parts that can fail. If you're weighing the whole thing against toilet paper, see are bidet attachments worth it for a payback sum with your own receipts.
Where ASSJET fits
ASSJET is an under-seat attachment: one knob, no plug, cold water only, made to go on in about five minutes with what's in the box. It isn't on sale yet. While you wait, find out which bathroom god you are with the quiz.
FAQ
How much does it cost to install a bidet attachment?
Nothing if you do it yourself, beyond the attachment and maybe a $10–$25 part. A plumber typically charges $100–$300 for the attachment fitted, per Fixr.
Do I need a plumber to install a bidet?
Not for most attachments or handheld sprayers. You do for standalone bidets, a new hot line, a seized shut-off valve, and (an electrician) for a new outlet.
How much does it cost to install an electric bidet seat?
Fixr puts installed electric seats at $470–$1,700 including the seat. Add $120–$200 if you need a new outlet.
Why are some bidet installation quotes over $1,000?
Those are standalone bidets or bidet toilets, which need new water, drain or electrical work. Fixr's national average across all types is about $1,000.
How long does a bidet installation take?
About 15–30 minutes DIY for an attachment or handheld. Bigger jobs are two to three hours of plumber time, per Fixr.
Can a bidet attachment damage my toilet?
Not when installed right. The risk is a slow leak at a joint, so do the paper-towel leak test and check again the next day.
More plain answers in our bidet guides, or find your bathroom god with the quiz.
Sources
- How much does it cost to install a bidet?, Fixr. https://www.fixr.com/costs/bidet-installation
- How Much Does Bidet Installation Cost?, HomeAdvisor. https://www.homeadvisor.com/cost/plumbing/install-a-bidet
- How much does a bidet cost to install?, HomeGuide. https://homeguide.com/costs/bidet-installation-cost
- How Much Does a Bidet Cost?, Angi. https://www.angi.com/articles/how-much-bidet-installation-cost.htm